Jump to content
Sign in to follow this  
ricco88

tablette storex ezee805

Recommended Posts

Bonjour,

J'ai acquis il y a peu une tablette storex. Ma fille a voulu installer le jeu des SIMS sur playstore. Cela ne fonctionnait pas. En regardant les forums, il était indiqué qu'il fallait installer lcd density pour augmenter la résolution à 240. Depuis, la tablette bloque sur la page de démarrage storex. j'ai suivi un tuto sur le forum au sujet d'adb mais rien n'y fait. Quelqu'un pourrait il m'aider svp ?

Merci d'avance !

ci-joint un copier-coller de mon adb :

adb wait-for-device - block until device is online

adb start-server - ensure that there is a server running

adb kill-server - kill the server if it is running

adb get-state - prints: offline | bootloader | device

adb get-serialno - prints: <serial-number>

adb status-window - continuously print device status for a specifie

d device

adb remount - remounts the /system partition on the device re

ad-write

adb reboot [bootloader|recovery] - reboots the device, optionally into the boo

tloader or recovery program

adb reboot-bootloader - reboots the device into the bootloader

adb root - restarts the adbd daemon with root permissions

adb usb - restarts the adbd daemon listening on USB

adb tcpip <port> - restarts the adbd daemon listening on TCP on th

e specified port

networking:

adb ppp <tty> [parameters] - Run PPP over USB.

Note: you should not automatically start a PPP connection.

<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1

[parameters] - Eg. defaultroute debug dump local notty usepeerdns

adb sync notes: adb sync [ <directory> ]

<localdir> can be interpreted in several ways:

- If <directory> is not specified, both /system and /data partitions will be u

pdated.

- If it is "system" or "data", only the corresponding partition

is updated.

environmental variables:

ADB_TRACE - Print debug information. A comma separated list

of the following values

1 or all, adb, sockets, packets, rwx, usb, sync

, sysdeps, transport, jdwp

ANDROID_SERIAL - The serial number to connect to. -s takes prior

ity over this if given.

ANDROID_LOG_TAGS - When used with the logcat option, only these de

bug tags are printed.

C:\adb>restor

'restor' n'est pas reconnu en tant que commande interne

ou externe, un programme exécutable ou un fichier de commandes.

C:\adb>Adb Push c:\nouveau /sdcard

Android Debug Bridge version 1.0.26

-d - directs command to the only connected USB devic

e

returns an error if more than one USB device is

present.

-e - directs command to the only running emulator.

returns an error if more than one emulator is r

unning.

-s <serial number> - directs command to the USB device or emulator w

ith

the given serial number. Overrides ANDROID_SERI

AL

environment variable.

-p <product name or path> - simple product name like 'sooner', or

a relative/absolute path to a product

out directory like 'out/target/product/sooner'.

If -p is not specified, the ANDROID_PRODUCT_OUT

environment variable is used, which must

be an absolute path.

devices - list all connected devices

connect <host>[:<port>] - connect to a device via TCP/IP

Port 5555 is used by default if no port number

is specified.

disconnect [<host>[:<port>]] - disconnect from a TCP/IP device.

Port 5555 is used by default if no port number

is specified.

Using this command with no additional arguments

will disconnect from all connected TCP/IP devic

es.

device commands:

adb push <local> <remote> - copy file/dir to device

adb pull <remote> [<local>] - copy file/dir from device

adb sync [ <directory> ] - copy host->device only if changed

(-l means list but don't copy)

(see 'adb help all')

adb shell - run remote shell interactively

adb shell <command> - run remote shell command

adb emu <command> - run emulator console command

adb logcat [ <filter-spec> ] - View device log

adb forward <local> <remote> - forward socket connections

forward specs are one of:

tcp:<port>

localabstract:<unix domain socket name>

localreserved:<unix domain socket name>

localfilesystem:<unix domain socket name>

dev:<character device name>

jdwp:<process pid> (remote only)

adb jdwp - list PIDs of processes hosting a JDWP transport

adb install [-l] [-r] [-s] <file> - push this package file to the device and i

nstall it

('-l' means forward-lock the app)

('-r' means reinstall the app, keeping its data

)

('-s' means install on SD card instead of inter

nal storage)

adb uninstall [-k] <package> - remove this app package from the device

('-k' means keep the data and cache directories

)

adb bugreport - return all information from the device

that should be included in a bug report.

adb help - show this help message

adb version - show version num

DATAOPTS:

(no option) - don't touch the data partition

-w - wipe the data partition

-d - flash the data partition

scripting:

adb wait-for-device - block until device is online

adb start-server - ensure that there is a server running

adb kill-server - kill the server if it is running

adb get-state - prints: offline | bootloader | device

adb get-serialno - prints: <serial-number>

adb status-window - continuously print device status for a specifie

d device

adb remount - remounts the /system partition on the device re

ad-write

adb reboot [bootloader|recovery] - reboots the device, optionally into the boo

tloader or recovery program

adb reboot-bootloader - reboots the device into the bootloader

adb root - restarts the adbd daemon with root permissions

adb usb - restarts the adbd daemon listening on USB

adb tcpip <port> - restarts the adbd daemon listening on TCP on th

e specified port

networking:

adb ppp <tty> [parameters] - Run PPP over USB.

Note: you should not automatically start a PPP connection.

<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1

[parameters] - Eg. defaultroute debug dump local notty usepeerdns

adb sync notes: adb sync [ <directory> ]

<localdir> can be interpreted in several ways:

- If <directory> is not specified, both /system and /data partitions will be u

pdated.

- If it is "system" or "data", only the corresponding partition

is updated.

environmental variables:

ADB_TRACE - Print debug information. A comma separated list

of the following values

1 or all, adb, sockets, packets, rwx, usb, sync

, sysdeps, transport, jdwp

ANDROID_SERIAL - The serial number to connect to. -s takes prior

ity over this if given.

ANDROID_LOG_TAGS - When used with the logcat option, only these de

bug tags are printed.

C:\adb>adb shell ls -l /system

drwxr-xr-x root root 2013-03-18 01:15 app

drwxr-xr-x root shell 2013-03-18 01:06 bin

-rwxrwxrwx root root 2685 2013-05-18 19:11 build.prop

drwxr-xr-x root root 2013-03-18 01:06 etc

drwxr-xr-x root root 2013-03-18 01:06 fonts

drwxr-xr-x root root 2013-03-18 01:06 framework

drwxr-xr-x root root 2013-03-18 01:07 lib

drwxr-xr-x root root 2013-03-18 01:06 lost+found

drwxr-xr-x root root 2013-03-18 01:07 media

drwxr-xr-x root root 2013-03-18 01:06 tts

drwxr-xr-x root root 2013-03-18 01:06 usr

drwxr-xr-x root shell 2013-03-18 01:07 vendor

drwxr-xr-x root shell 2013-03-18 01:07 xbin

C:\adb>adb get /system/build.prop

Android Debug Bridge version 1.0.26

-d - directs command to the only connected USB devic

e

returns an error if more than one USB device is

present.

-e - directs command to the only running emulator.

returns an error if more than one emulator is r

unning.

-s <serial number> - directs command to the USB device or emulator w

ith

the given serial number. Overrides ANDROID_SERI

AL

environment variable.

-p <product name or path> - simple product name like 'sooner', or

a relative/absolute path to a product

out directory like 'out/target/product/sooner'.

If -p is not specified, the ANDROID_PRODUCT_OUT

environment variable is used, which must

be an absolute path.

devices - list all connected devices

connect <host>[:<port>] - connect to a device via TCP/IP

Port 5555 is used by default if no port number

is specified.

disconnect [<host>[:<port>]] - disconnect from a TCP/IP device.

Port 5555 is used by default if no port number

is specified.

Using this command with no additional arguments

will disconnect from all connected TCP/IP devic

es.

device commands:

adb push <local> <remote> - copy file/dir to device

adb pull <remote> [<local>] - copy file/dir from device

adb sync [ <directory> ] - copy host->device only if changed

(-l means list but don't copy)

(see 'adb help all')

adb shell - run remote shell interactively

adb shell <command> - run remote shell command

adb emu <command> - run emulator console command

adb logcat [ <filter-spec> ] - View device log

adb forward <local> <remote> - forward socket connections

forward specs are one of:

tcp:<port>

localabstract:<unix domain socket name>

localreserved:<unix domain socket name>

localfilesystem:<unix domain socket name>

dev:<character device name>

jdwp:<process pid> (remote only)

adb jdwp - list PIDs of processes hosting a JDWP transport

adb install [-l] [-r] [-s] <file> - push this package file to the device and i

nstall it

('-l' means forward-lock the app)

('-r' means reinstall the app, keeping its data

)

('-s' means install on SD card instead of inter

nal storage)

adb uninstall [-k] <package> - remove this app package from the device

('-k' means keep the data and cache directories

)

adb bugreport - return all information from the device

that should be included in a bug report.

adb help - show this help message

adb version - show version num

DATAOPTS:

(no option) - don't touch the data partition

-w - wipe the data partition

-d - flash the data partition

scripting:

adb wait-for-device - block until device is online

adb start-server - ensure that there is a server running

adb kill-server - kill the server if it is running

adb get-state - prints: offline | bootloader | device

adb get-serialno - prints: <serial-number>

adb status-window - continuously print device status for a specifie

d device

adb remount - remounts the /system partition on the device re

ad-write

adb reboot [bootloader|recovery] - reboots the device, optionally into the boo

tloader or recovery program

adb reboot-bootloader - reboots the device into the bootloader

adb root - restarts the adbd daemon with root permissions

adb usb - restarts the adbd daemon listening on USB

adb tcpip <port> - restarts the adbd daemon listening on TCP on th

e specified port

networking:

adb ppp <tty> [parameters] - Run PPP over USB.

Note: you should not automatically start a PPP connection.

<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1

[parameters] - Eg. defaultroute debug dump local notty usepeerdns

adb sync notes: adb sync [ <directory> ]

<localdir> can be interpreted in several ways:

- If <directory> is not specified, both /system and /data partitions will be u

pdated.

- If it is "system" or "data", only the corresponding partition

is updated.

environmental variables:

ADB_TRACE - Print debug information. A comma separated list

of the following values

1 or all, adb, sockets, packets, rwx, usb, sync

, sysdeps, transport, jdwp

ANDROID_SERIAL - The serial number to connect to. -s takes prior

ity over this if given.

ANDROID_LOG_TAGS - When used with the logcat option, only these de

bug tags are printed.

C:\adb>adb pull /system/build.prop

37 KB/s (2685 bytes in 0.069s)

C:\adb>

ci joint mon build.prop

# begin build properties

# autogenerated by buildinfo.sh

ro.build.id=JRO03H

ro.build.display.id=STOREX-dt-805F-yx-4.1.1-20130317

ro.build.version.incremental=20130317

ro.build.version.sdk=16

ro.build.version.codename=REL

ro.build.version.release=4.1.1

ro.build.date=Sun Mar 17 18:51:47 CST 2013

ro.build.date.utc=1363517507

ro.build.type=eng

ro.build.user=root

ro.build.host=guangg-pc

ro.build.tags=release-keys

ro.product.model=eZee Tab805

ro.product.brand=STOREX

ro.product.name=rk30sdk

ro.product.device=rk30sdk

ro.product.board=rk30sdk

ro.product.cpu.abi=armeabi-v7a

ro.product.cpu.abi2=armeabi

ro.product.manufacturer=STOREX

ro.wifi.channels=

ro.board.platform=rk30xx

# ro.build.product is obsolete; use ro.product.device

ro.build.product=rk30sdk

# Do not try to parse ro.build.description or .fingerprint

ro.build.description=STOREX-dt-805F-yx-4.1.1-20130317

ro.build.fingerprint=STOREX/rk30sdk/rk30sdk:4.1.1/JRO03H/20130317:eng/release-keys

ro.build.characteristics=tablet

# end build properties

#

# system.prop

#

#rild.libpath=/system/lib/libreference-ril.so

#rild.libargs=-d /dev/ttyUSB2

#

# ADDITIONAL_BUILD_PROPERTIES

#

ro.com.android.dateformat=MM-dd-yyyy

ro.config.ringtone=Ring_Synth_04.ogg

ro.config.notification_sound=pixiedust.ogg

ro.carrier=unknown

ro.config.alarm_alert=Alarm_Classic.ogg

dalvik.vm.heapstartsize=8m

dalvik.vm.heapgrowthlimit=80m

dalvik.vm.heapsize=384m

ro.config.facelock=enable_facelock

persist.facelock.detect_cutoff=5000

persist.facelock.recog_cutoff=5000

sys.bluetooth.module.mtk=0

sys.4in1.module.mtk=0

ro.product.locale.language=fr

ro.product.locale.region=FR

persist.sys.language=fr

persist.sys.country=FR

persist.sys.strictmode.visual=false

dalvik.vm.jniopts=warnonly

ro.rksdk.version=RK30_ANDROID4.1.1-SDK-v1.00.00

sys.hwc.compose_policy=6

sys.rkadb.root=0

ro.sf.fakerotation=true

ro.sf.hwrotation=270

ro.rk.MassStorage=false

wifi.interface=wlan0

ro.sf.lcd_density=120

ro.rk.screenoff_time=60000

ro.rk.def_brightness=200

ro.rk.homepage_base=http://www.google.com/webhp?client={CID}&source=android-home

ro.rk.install_non_market_apps=true

ro.default.size=100

persist.sys.timezone=Europe/Paris

ro.product.usbfactory=STOREX

wifi.supplicant_scan_interval=15

ro.opengles.version=131072

ro.factory.tool=0

ro.kernel.android.checkjni=0

ro.factory.storage_policy=0

persist.sys.usb.config=mass_storage

testing.mediascanner.skiplist=/mnt/sdcard/Android/

rild.libargs=-d_/dev/ttyUSB1

ril.pppchannel=/dev/ttyUSB2

rild.libpath=/system/lib/libril-rk29-dataonly.so

ril.function.dataonly=1

ro.product.version=1.0.0

ro.product.ota.host=www.rockchip.com:2300

dalvik.vm.dexopt-flags=m=y

net.bt.name=Android

dalvik.vm.stack-trace-file=/data/anr/traces.txt

j'ai changer la valeur 240 par 120 (ro.sf.lcd_density)

Edited by ricco88

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  





×
×
  • Create New...