Jump to content

[Kernel][JB 4.2.2] ANARKY -- LEAN -- FANCY


Recommended Posts

EXP 104 dispo.

/Experimental Kernel Differential Changelog/

Version:

ak.104.jb.eva03

•anarkia1976 - Kernel Version: ak.104.jb.eva03

•anarkia1976 - Linux 3.0.44

•anarkia1976 - block/Makefile: Disable NOOP

•anarkia1976 - cyanogenmod_ak_defconfig: Enable BFQv5, disable NOOP, Default DEADLINE

•franciscofranco - Add BFQv5

•Todd Poynor - cpufreq: interactive: remove input_boost handling

•Todd Poynor - cpufreq: interactive: handle speed up and down in the realtime task

•Sam Leffler - cpufreq: interactive: keep freezer happy when not current governor

•Sam Leffler - cpufreq: interactive: take idle notifications only when active

•anarkia1976 - panel-s6e8aa0.c + board-tuna-display.c: Add CM10 color palette

•anarkia1976 - ipv4/Makefile: ipv4/Kconfig: Compile with VENO and WESTWOOD (Default)

•anarkia1976 - opp4xxx_data.c: Add low step 180Mhz and custom Frequencies

•Todd Poynor - cpufreq: interactive: run at fraction of hispeed_freq when load is low

•Todd Poynor - cpufreq: interactive: always limit initial speed bump to hispeed

•anarkia1976 - cyanogenmod_ak_defconfig: XZ for Kernel and Initramfs

•Markus F.X.J. Oberhumer - lib/lzo: Update LZO compression to current upstream version

•Ezekeel - Added Battery Life eXtender (BLX) version 1.

•Ezekeel - Added optimized compiler flags.

•Ezekeel - Added optimized CRC32 algorithm.

•Ezekeel - Added simple sysfs interface to force adapters that are detected as USB to charge as AC.

•Ezekeel - Added Temp Control version 1.

•Ezekeel - Added Sound Control version 1.

•anarkia1976 - displays/panel-s6e8aa0.c: Contrast tweak from morfic - Trinity Kernel

•Renaud Allard - Implement vibrator control like in CM10

depuis mon Nexus Prime

Link to comment
Share on other sites

et alors?! Tu as testé?! En tout cas j'ai ré flashé le 076 après le Trinity... et avec les voltages de Trinity, bah c'est une tuerie niveau batterie! Et fluidité aussi forcément!

Envoyé depuis mon Galaxy Nexus avec Tapatalk

Link to comment
Share on other sites

et alors?! Tu as testé?! En tout cas j'ai ré flashé le 076 après le Trinity... et avec les voltages de Trinity, bah c'est une tuerie niveau batterie! Et fluidité aussi forcément!

Envoyé depuis mon Galaxy Nexus avec Tapatalk

Pas encore testé, demain matin je met en route.

depuis mon Nexus Prime

  • Like 1
Link to comment
Share on other sites

Bon j'ai craqué, mis en place avec dernière nightly CM.

Il a repris les bases du kernel CM avec ses améliorations.

Moins de chichi, que tu concret.

Je tourne en deadline et hotplug qui est fait pour les multi-coeur.

Toujours aussi fluide, mais pas de possibilité de régler le voltage......pour l'instant. ;)

depuis mon Nexus Prime

Link to comment
Share on other sites

Oui c'est effectivement ce que j'ai fait hier soir après être revenu sur Anarky pour tester et ça a l'air de bien fonctionner... et la batterie, 48% a cette heure ci... j'ai pas beaucoup utilisé mon téléphone mais ça me semble quand même meilleur que d'habitude.

Envoyé depuis mon Galaxy Nexus avec Tapatalk

Link to comment
Share on other sites

EXP 107 dispo.......

•anarkia1976 - Kernel Version: ak.107.jb.eva03

•Greg Kroah-Hartman - Linux 3.0.45

•anarkia1976 - Set Only one Default governor: interactive

•anarkia1976 - deadline-iosched.c: Set fifo_batch = 4

•anarkia1976 - deadline-iosched.c: Set dd->front_merges = 0

•anarkia1976 - deadline-iosched.c: Tweak to reduce the read/write submit times

•Ezekeel - Added Custom Voltage version 3

•anarkia1976 - ecc ... ecc ... see Github.

depuis mon Nexus Prime

Edited by BARBAC
Link to comment
Share on other sites

Euh oui! Voilà :

rehyqe8a.jpg

Interactive, bfq. Min 153, max 1228.

Envoyé depuis mon Galaxy Nexus avec Tapatalk

Pour 307MHz, tu es en dessous de la tension par défaut sous Trinity...qui est 850mV...

ParanoidAndroid Powered by Trinity

Link to comment
Share on other sites

Euh oui c'est vrai mais ça passe comme ça chez moi. En descendant encore par contre mon processeur peut ne pas trop aimer... pour le reste je me suis basé sur les voltages de Trinity mais j'ai un peu adapté comme les fréquences ne sont pas les mêmes...

Envoyé depuis mon Galaxy Nexus avec Tapatalk

Link to comment
Share on other sites

Bah on a beau dire que ça fait pas gagner grand chose (je le pense un peu aussi) mais depuis que j'ai mis ça en place avant hier soir, il me semble vraiment que l'autonomie est meilleure... après c'est qu'un ressenti donc ça reste subjectif. Maintenant l'undervoltage de Trinity est assez poussé et ça diminue quand même de plus de 0.1V par rapport au voltage stock peut-être que la, effectivement ça a un impact.

Au pire teste, et donne tes ressentis.

Envoyé depuis mon Galaxy Nexus avec Tapatalk

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...