RafGMZ Posted March 11, 2013 Share Posted March 11, 2013 Bonjour, voila j'ai un gros porbleme avec mon portable, j'etais sur l'un des derniere nightly de cyano 10, aucun probleme quand soudain hier, mon portable vibre, je vais pour repondre et tous se fige, impossible de revenir au menu, ni meme de le redemarrer en appuient longtemps sur power, j'ai donc du enlever la batterie. Depuis il m'est impossible de le redemmarer, il reste bloquer sur Samsung Galaxy S 2, il mais de plus impossible de passer en recovery, je n'ai plus acces au recovery en fessant power, home et volume haut, j'ai rien qui ne s'affiche. Le seul truc c'est le mode download que je peut utiliser, j'ai donc pris un rom officiel la "I9100XWKJ2_I9100XEFKJ1_XEF" de samfrimware, je l'ai mis dans PDA sous odin, le portable et reconnu et tous, mais sa me marche pas, je reste bloquer a sa : <ID:0/006> Added!! <OSM> Enter CS for MD5.. <OSM> Check MD5.. Do not unplug the cable.. <OSM> Please wait.. <OSM> I9100XWKJ2_I9100XXKI4_I9100XEFKJ1_HOME.tar.md5 is valid. <OSM> Checking MD5 finished Sucessfully.. <OSM> Leave CS.. <ID:0/006> Odin v.3 engine (ID:6).. <ID:0/006> File analysis.. <ID:0/006> SetupConnection.. <ID:0/006> Initialzation.. <ID:0/006> Get PIT for mapping.. <ID:0/006> Firmware update start.. <ID:0/006> boot.bin <ID:0/006> NAND Write Start!! Il n'y a aucun barre vert je c'est vraiment plus quoi faire. Merci Quote Link to comment Share on other sites More sharing options...
tibob77 Posted March 11, 2013 Share Posted March 11, 2013 Salut, T'as essayé avec Odin 1.85 ? Quote Link to comment Share on other sites More sharing options...
sk4c Posted March 11, 2013 Share Posted March 11, 2013 (edited) slt, une base saine comprend 1 fichier bootloader (apboot) , 1 fichier Csc, 1 fichier modem et des fois 1 fichier pour la repartition memoire la rom que ta flashé c'est une rom en 1 seul fichier, pas du tout ce qu il te faut pour repartir sur une base propre soluce 1 : test avec la CM9 version Odin dispo ici ----> http://www.mediafire...t9eaz6mc3o95x1c soluce 2 : repartir d'une base saine dispo sur sammobile ou meme ici dans la section Rom & Dev soluce 3 : chercher sur le thread de CM10.1 officiel tu vas y trouver un fichier a flashé via Odin qui remet le mode recovery si tu choisi la soluce n°1, place le fichier Apboot dans bootloader, le Code dans Csc, et Modem dans modem, ne coche surtout pas repartition et laisse de f.reset time cocher, et tu flash bonne chance Edited March 11, 2013 by sk4c Quote Link to comment Share on other sites More sharing options...
RafGMZ Posted March 11, 2013 Author Share Posted March 11, 2013 Bonjour, j'ai tester la solution 1, pas de changement : <ID:0/006> Added!! <OSM> Enter CS for MD5.. <OSM> Check MD5.. Do not unplug the cable.. <OSM> Please wait.. <OSM> I9100_APBOOT_I9100XXKP2_CL17109_REV02_eng_mid_ship.tar.md5 is valid. <OSM> MODEM_I9100XXKP1_REV_02_CL1085642.tar.md5 is valid. <OSM> I9100_CODE_CM9_12252011.tar.md5 is valid. <OSM> Checking MD5 finished Sucessfully.. <OSM> Leave CS.. <ID:0/006> Odin v.3 engine (ID:6).. <ID:0/006> File analysis.. <ID:0/006> SetupConnection.. <ID:0/006> Initialzation.. <ID:0/006> Get PIT for mapping.. <ID:0/006> Firmware update start.. <ID:0/006> boot.bin <ID:0/006> NAND Write Start!! Rien, n'apparais, j'ai tester plusieurs rom samsung officiel, le même problème le pire c'est que je ne c'est vraiment pas pourquoi sa aplanter, sa c'est passer comme ca, lorsque je m'apprettais a envoyer un SMS, j'ai l'habitude a bidouiller mon portable, mais la je seche vraiment ^^ merci Quote Link to comment Share on other sites More sharing options...
sk4c Posted March 11, 2013 Share Posted March 11, 2013 Quand je rentre je te cherche le lien pour flashé uniquement le recovery pour cm10.1 Envoyé depuis mon GT-I9100 avec Tapatalk Quote Link to comment Share on other sites More sharing options...
Thialala Posted March 11, 2013 Share Posted March 11, 2013 Salut, As tu essayé de changer de port USB ? Kies ne tourne t-il pas en fond de tâches si il est installé ? Quote Link to comment Share on other sites More sharing options...
RafGMZ Posted March 11, 2013 Author Share Posted March 11, 2013 Bonjour, oui j'ai tester de changer de port USB, et kies na tourne pas en tache de fond, j'ai verifier, merci Quote Link to comment Share on other sites More sharing options...
raphoudu57 Posted March 11, 2013 Share Posted March 11, 2013 Flash ça via odin 1.85 http://d-h.st/XCc Quote Link to comment Share on other sites More sharing options...
RafGMZ Posted March 11, 2013 Author Share Posted March 11, 2013 Bonjour, voila merci, mais sa nefais rien : <ID:0/007> Added!! <ID:0/007> Odin v.3 engine (ID:7).. <ID:0/007> File analysis.. <ID:0/007> SetupConnection.. <ID:0/007> Initialzation.. <ID:0/007> Get PIT for mapping.. <ID:0/007> Firmware update start.. <ID:0/007> zImage <ID:0/007> NAND Write Start!! Meme en attendant longtemps Quote Link to comment Share on other sites More sharing options...
sk4c Posted March 11, 2013 Share Posted March 11, 2013 (edited) arf pas bon, Android 2.3.4 XXKH3 firmware + ODIN3 v1.85 ou I9100XXLPH.zip test une des 2 ou les 2 les 2 sont des base propre qui on fait repartir plus d un S2 apres un semi brick via CM9-10-10.1 Edited March 11, 2013 by sk4c Quote Link to comment Share on other sites More sharing options...
raphoudu57 Posted March 11, 2013 Share Posted March 11, 2013 C'est pas passé? En mode recovery, tu n'as rien? Quote Link to comment Share on other sites More sharing options...
sk4c Posted March 11, 2013 Share Posted March 11, 2013 MDP des rom ---> androidfirmwares.com Quote Link to comment Share on other sites More sharing options...
RafGMZ Posted March 11, 2013 Author Share Posted March 11, 2013 Merci je vais tester ca, non ca ne passe pas en recovery j'ai un ecran noir, et la barre le se termine pas. Quote Link to comment Share on other sites More sharing options...
raphoudu57 Posted March 11, 2013 Share Posted March 11, 2013 Essaye de flasher ce kernel. S'il passe au vert, recovery ... http://d-h.st/frK 1 Quote Link to comment Share on other sites More sharing options...
Thialala Posted March 11, 2013 Share Posted March 11, 2013 Essaye de flasher ce kernel. S'il passe au vert, recovery ... http://d-h.st/frK Une valeur sûre ;). Quote Link to comment Share on other sites More sharing options...
raphoudu57 Posted March 11, 2013 Share Posted March 11, 2013 Une valeur sûre ;). J'attend sa réponse :) Quote Link to comment Share on other sites More sharing options...
RafGMZ Posted March 11, 2013 Author Share Posted March 11, 2013 Oh, mon portable ne s'allume plus du tous que plus rien qui s'affiche Quote Link to comment Share on other sites More sharing options...
raphoudu57 Posted March 11, 2013 Share Posted March 11, 2013 En voulant flasher mon lien? Enleve la batterie quelques secondes, recharge le quelques minutes et redémarre le en mode download ou recovery. Quote Link to comment Share on other sites More sharing options...
RafGMZ Posted March 11, 2013 Author Share Posted March 11, 2013 En voulant flasher ca : Android 2.3.4 XXKH3 firmware + ODIN3 v1.85 Mais impossible de le demarrer, meme en le chargent, la batterie n'apparais pas. Quote Link to comment Share on other sites More sharing options...
Thialala Posted March 11, 2013 Share Posted March 11, 2013 Retire la batterie 2mn et réessaie. Quote Link to comment Share on other sites More sharing options...
raphoudu57 Posted March 11, 2013 Share Posted March 11, 2013 Ah j'ai cru que c'était mon lien. :) Quote Link to comment Share on other sites More sharing options...
RafGMZ Posted March 11, 2013 Author Share Posted March 11, 2013 ^^ non il ne s'allume pas non plus Quote Link to comment Share on other sites More sharing options...
raphoudu57 Posted March 11, 2013 Share Posted March 11, 2013 Rien du tout? Branche le sur le secteur, rien ne se passe? Quote Link to comment Share on other sites More sharing options...
RafGMZ Posted March 11, 2013 Author Share Posted March 11, 2013 Non, plus rien Quote Link to comment Share on other sites More sharing options...
raphoudu57 Posted March 11, 2013 Share Posted March 11, 2013 Ola, c'est quoi comme genre de rom que tu as flashé? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.