Jump to content
metalkouraX

Bootloader non débloqué mais...

Recommended Posts

Volume + , bouton home et brancher le câble et ramène a redémarrer en mode fastboot :)

Edited by Okizha

Share this post


Link to post
Share on other sites

est ce qu il y a une personne qui a essayer le recovry du L3?

Share this post


Link to post
Share on other sites

il ne faut pas mettre le recovry du L3 car le L7 n'est pas prévu pour ça!!!!

Pffffff au passage j'ai tenté le recovry du L7 modifié la mienne puis comme je pensais me tromper sur ma modif j'ai essayé celle de Snx ,bref les 2 n'ont rien donné ,j'ai mis une plombe à réparer mon phone suite à ça ,clairement cela ne donne rien de bon, je vois plus quoi faire on dirait que la sécurité mise en place de Lg est méga balaise ,je pense que ça dépasse mes compétences à mon avis soit on à besoin d'un codeur ultra balaise en développement soit il y à bien un verrou physique , j'en reviens donc au point de départ...

RAS LE BOL!!!!

Mais je laisserai pas tomber non plus !!!

Share this post


Link to post
Share on other sites

par securité tu entend quoi ? un truck ou ya le logo lg et ya ecrit security error ?

Share this post


Link to post
Share on other sites

Je cite :

Le L7 prend le même système que les anciens Motorola (je sais pas si c'est toujours le cas) comme le Defy, le bootloader était bloqué par une clé de cryptage complexe qui ne pout être débloquée sans clé fournie par le constructeur.

La seule solution qui avait été trouvée était de contourner le bootloader en bootant sur un nouveau en 2nd init' mais ça n'est peut-être pas possible avec le L7.

Tout ça pour dire que le bootloader est boqué avec une clé de cryptage qui ne peut être trouvée par la communauté aussi facilement que pour d'autres téléphones comme ton ancien X8, d'où la difficulté des développeurs qui essayent de le débloquer.

Envoyé depuis mon LG-P700 avec Tapatalk

Share this post


Link to post
Share on other sites

en gros je dois créer un nouveau boot ????

commence à me gonfler ce L7!!

Share this post


Link to post
Share on other sites

Je vais résumer la chose :

Enfaite sans l'aide de LG il est presque impossible de le faire nous même.

Envoyé depuis mon LG-P700 avec Tapatalk

Share this post


Link to post
Share on other sites

Ça se bouge sur XDA ;) un très gros dev est sur le bootloader en se moment !

Envoyé depuis mon LG-P700 avec Tapatalk

Share this post


Link to post
Share on other sites

Il y a un tuto recement poster sur xda mais je ne parle pas parler anglais donc je voulais savoir si vous pouvez traduire merci je suis tjt androidunited7 j'ai juste refais un compte

Share this post


Link to post
Share on other sites

Un lien du tuto en question ?

Envoyé depuis mon LG-P700 avec Tapatalk

Share this post


Link to post
Share on other sites

Je peux avoir une traduction svp

Vous devez entrer ci-dessous dans adb shell

su

Vous devez exécuter les commandes suivantes en tant que root

echo 'boot-recovery ' > /cache/recovery/command

Créer un fichier de commandes

echo '--update_package=SDCARD:update.zip' >> /cache/recovery/command

Rédiger commande pour l'installation update.zip

reboot recovery

Commande pour redémarrer en mode recovery mode

Maintenant, lorsque le LG redémarre et essaye d'installer update.zip il donnera une erreur de bouton d'alimentation , il faut presser une seconde ou deux et il va faire apparaître le menu de récupération

Edited by Okizha

Share this post


Link to post
Share on other sites

A flasher un fichier zip , une rom par exemple ;)

Mais sa sert a rien pour l'instant.

Share this post


Link to post
Share on other sites

Bah si sa sert puisque que on peut démarrer ton recouvery que tu as fais avec cela faut essayer c'est tout

Share this post


Link to post
Share on other sites

Content de voir que ça avance bien ;)

Share this post


Link to post
Share on other sites
Found it' date=' it was hidden in a different place!

Going to try it tomorrow :P

For those who can't wait, replace content of init.rc in the boot-image with

import /init.lge.early.rc

on early-init
# Set init and its forked children's oom_adj.
write /proc/1/oom_adj -16

start ueventd

# create mountpoints
mkdir /mnt 0775 root system

on init

sysclktz 0

loglevel 3

# setup the global environment
export PATH /sbin:/vendor/bin:/system/sbin:/system/bin:/system/xbin
export LD_LIBRARY_PATH /vendor/lib:/system/lib
export ANDROID_BOOTLOGO 1
export ANDROID_ROOT /system
export ANDROID_ASSETS /system/app
export ANDROID_DATA /data
export EXTERNAL_STORAGE /mnt/sdcard
export ASEC_MOUNTPOINT /mnt/asec
export LOOP_MOUNTPOINT /mnt/obb
export BOOTCLASSPATH /system/framework/core.jar:/system/framework/core-junit.jar:/system/framework/bouncycastle.jar:/system/framework/ext.jar:/system/framework/framework.jar:/system/framework/framework2.jar:/system/framework/android.policy.jar:/system/framework/services.jar:/system/framework/apache-xml.jar:/system/framework/filterfw.jar:/system/framework/com.lge.core.jar

# Backward compatibility
symlink /system/etc /etc
symlink /sys/kernel/debug /d

# Right now vendor lives on the same filesystem as system,
# but someday that may change.
symlink /system/vendor /vendor

# create mountpoints
mkdir /mnt 0775 root system
mkdir /mnt/sdcard 0000 system system

# Create cgroup mount point for cpu accounting
mkdir /acct
mount cgroup none /acct cpuacct
mkdir /acct/uid

# Backwards Compat - XXX: Going away in G*
symlink /mnt/sdcard /sdcard

mkdir /system
mkdir /data 0771 system system
mkdir /cache 0770 system cache
mkdir /config 0500 root root

# Directory for putting things only root should see.
mkdir /mnt/secure 0700 root root

# Directory for staging bindmounts
mkdir /mnt/secure/staging 0700 root root

# Directory-target for where the secure container
# imagefile directory will be bind-mounted
mkdir /mnt/secure/asec 0700 root root

# Secure container public mount points.
mkdir /mnt/asec 0700 root system
mount tmpfs tmpfs /mnt/asec mode=0755,gid=1000

# Filesystem image public mount points.
mkdir /mnt/obb 0700 root system
mount tmpfs tmpfs /mnt/obb mode=0755,gid=1000

write /proc/sys/kernel/panic_on_oops 1
write /proc/sys/kernel/hung_task_timeout_secs 0
write /proc/cpu/alignment 4
write /proc/sys/kernel/sched_latency_ns 10000000
write /proc/sys/kernel/sched_wakeup_granularity_ns 2000000
write /proc/sys/kernel/sched_compat_yield 1
write /proc/sys/kernel/sched_child_runs_first 0
write /proc/sys/kernel/randomize_va_space 1 # donghyun.kwon@lge.com (20120215) : patch for front camera

# Create cgroup mount points for process groups
mkdir /dev/cpuctl
mount cgroup none /dev/cpuctl cpu
chown system system /dev/cpuctl
chown system system /dev/cpuctl/tasks
chmod 0777 /dev/cpuctl/tasks
write /dev/cpuctl/cpu.shares 1024

mkdir /dev/cpuctl/fg_boost
chown system system /dev/cpuctl/fg_boost/tasks
chmod 0777 /dev/cpuctl/fg_boost/tasks
write /dev/cpuctl/fg_boost/cpu.shares 1024

mkdir /dev/cpuctl/bg_non_interactive
chown system system /dev/cpuctl/bg_non_interactive/tasks
chmod 0777 /dev/cpuctl/bg_non_interactive/tasks
# 5.0 %
write /dev/cpuctl/bg_non_interactive/cpu.shares 52

# Allow everybody to read the xt_qtaguid resource tracking misc dev.
# This is needed by any process that uses socket tagging.
chmod 0644 /dev/xt_qtaguid

on fs
# mount mtd partitions
# Mount /system rw first to give the filesystem a chance to save a checkpoint
mount yaffs2 mtd@system /system
mount yaffs2 mtd@system /system ro remount
mount yaffs2 mtd@userdata /data nosuid nodev
mount yaffs2 mtd@persist /persist nosuid nodev
mount yaffs2 mtd@cache /cache nosuid nodev
mount yaffs2 mtd@persist /persist nosuid nodev

on post-fs
# once everything is setup, no need to modify /
mount rootfs rootfs / ro noatime remount

# We chown/chmod /cache again so because mount is run as root + defaults
chown system cache /cache
chmod 0770 /cache

# This may have been created by the recovery system with odd permissions
chown system cache /cache/recovery
chmod 0770 /cache/recovery

#change permissions on vmallocinfo so we can grab it from bugreports
chown root log /proc/vmallocinfo
chmod 0440 /proc/vmallocinfo

#change permissions on kmsg & sysrq-trigger so bugreports can grab kthread stacks
chown root system /proc/kmsg
chmod 0440 /proc/kmsg
chown root system /proc/sysrq-trigger
chmod 0220 /proc/sysrq-trigger

# create the lost+found directories, so as to enforce our permissions
mkdir /cache/lost+found 0770 root root

on post-fs-data
# We chown/chmod /data again so because mount is run as root + defaults
chown system system /data
chmod 0771 /data

# Create dump dir and collect dumps.
# Do this before we mount cache so eventually we can use cache for
# storing dumps on platforms which do not have a dedicated dump partition.
mkdir /data/dontpanic 0750 root log

# Collect apanic data, free resources and re-arm trigger
copy /proc/apanic_console /data/dontpanic/apanic_console
chown root log /data/dontpanic/apanic_console
chmod 0640 /data/dontpanic/apanic_console

copy /proc/apanic_threads /data/dontpanic/apanic_threads
chown root log /data/dontpanic/apanic_threads
chmod 0640 /data/dontpanic/apanic_threads

write /proc/apanic_console 1

# create basic filesystem structure
mkdir /data/misc 01771 system misc
mkdir /data/misc/keystore 0700 keystore keystore
mkdir /data/misc/keychain 0771 system system
mkdir /data/misc/vpn 0770 system vpn
mkdir /data/misc/systemkeys 0700 system system
# give system access to wpa_supplicant.conf for backup and restore
mkdir /data/misc/wifi 0770 wifi wifi
chmod 0660 /data/misc/wifi/wpa_supplicant.conf
mkdir /data/local 0751 root root
mkdir /data/local/tmp 0771 shell shell
mkdir /data/data 0771 system system
mkdir /data/app-private 0771 system system
mkdir /data/app 0771 system system
mkdir /data/property 0700 root root
mkdir /data/radio 0770 radio radio

# create dalvik-cache, so as to enforce our permissions
mkdir /data/dalvik-cache 0771 system system

# create resource-cache and double-check the perms
mkdir /data/resource-cache 0771 system system
chown system system /data/resource-cache
chmod 0771 /data/resource-cache

# create the lost+found directories, so as to enforce our permissions
mkdir /data/lost+found 0770 root root

# create directory for DRM plug-ins
mkdir /data/drm 0774 drm drm

# If there is no fs-post-data action in the init.<device>.rc file, you
# must uncomment this line, otherwise encrypted filesystems
# won't work.
# Set indication (checked by vold) that we have finished this action
#setprop vold.post_fs_data_done 1

chown system system /sys/class/android_usb/android0/f_mass_storage/lun/file
chmod 0660 /sys/class/android_usb/android0/f_mass_storage/lun/file
#LGE_CHANGE_S : USB Autorun function. hyunjin2.lim@lge.com
#chown system system /sys/class/android_usb/android0/f_rndis/ethaddr
#chmod 0660 /sys/class/android_usb/android0/f_rndis/ethaddr
chown system system /sys/class/android_usb/android0/f_ecm/ethaddr
chmod 0660 /sys/class/android_usb/android0/f_ecm/ethaddr
chown system system /sys/class/android_usb/android0/f_cdrom_storage/lun/cdrom_file
chmod 0660 /sys/class/android_usb/android0/f_cdrom_storage/lun/cdrom_file
chown system system /sys/class/android_usb/android0/f_cdrom_storage/lun/cdrom_usbmode
chmod 0660 /sys/class/android_usb/android0/f_cdrom_storage/lun/cdrom_usbmode
#LGE_CHANGE_E : USB Autorun function.


# Another one bytes the dust. Disable security check
#on boot
# [sTART][20111216, inhwan.we@lge.com]
# exec /sbin/wallpaper -ap
# wait /sbin/wallpaper
# [END] [20111216, inhwan.we@lge.com]

# basic network init
ifup lo
hostname localhost
domainname localdomain

# set RLIMIT_NICE to allow priorities from 19 to -20
setrlimit 13 40 40

# Memory management. Basic kernel parameters, and allow the high
# level system server to be able to adjust the kernel OOM driver
# paramters to match how it is managing things.
write /proc/sys/vm/overcommit_memory 1
write /proc/sys/vm/min_free_order_shift 4
chown root system /sys/module/lowmemorykiller/parameters/adj
chmod 0664 /sys/module/lowmemorykiller/parameters/adj
chown root system /sys/module/lowmemorykiller/parameters/minfree
chmod 0664 /sys/module/lowmemorykiller/parameters/minfree

# Tweak background writeout
write /proc/sys/vm/dirty_expire_centisecs 200
write /proc/sys/vm/dirty_background_ratio 5

# Permissions for System Server and daemons.
chown radio system /sys/android_power/state
chown radio system /sys/android_power/request_state
chown radio system /sys/android_power/acquire_full_wake_lock
chown radio system /sys/android_power/acquire_partial_wake_lock
chown radio system /sys/android_power/release_wake_lock
chown radio system /sys/power/state
chown radio system /sys/power/wake_lock
chown radio system /sys/power/wake_unlock
chmod 0660 /sys/power/state
chmod 0660 /sys/power/wake_lock
chmod 0660 /sys/power/wake_unlock
chown system system /sys/class/timed_output/vibrator/enable
chown system system /sys/class/leds/keyboard-backlight/brightness
chown system system /sys/class/leds/lcd-backlight/brightness
chown system system /sys/class/leds/button-backlight/brightness
chown system system /sys/class/leds/jogball-backlight/brightness
chown system system /sys/class/leds/red/brightness
chown system system /sys/class/leds/green/brightness
chown system system /sys/class/leds/blue/brightness
chown system system /sys/class/leds/red/device/grpfreq
chown system system /sys/class/leds/red/device/grppwm
chown system system /sys/class/leds/red/device/blink
chown system system /sys/class/leds/red/brightness
chown system system /sys/class/leds/green/brightness
chown system system /sys/class/leds/blue/brightness
chown system system /sys/class/leds/red/device/grpfreq
chown system system /sys/class/leds/red/device/grppwm
chown system system /sys/class/leds/red/device/blink
chown system system /sys/class/timed_output/vibrator/enable
chown system system /sys/module/sco/parameters/disable_esco
chown system system /sys/kernel/ipv4/tcp_wmem_min
chown system system /sys/kernel/ipv4/tcp_wmem_def
chown system system /sys/kernel/ipv4/tcp_wmem_max
chown system system /sys/kernel/ipv4/tcp_rmem_min
chown system system /sys/kernel/ipv4/tcp_rmem_def
chown system system /sys/kernel/ipv4/tcp_rmem_max
chown root radio /proc/cmdline

# Define TCP buffer sizes for various networks
# ReadMin, ReadInitial, ReadMax, WriteMin, WriteInitial, WriteMax,
setprop net.tcp.buffersize.default 4096,87380,110208,4096,16384,110208
setprop net.tcp.buffersize.wifi 524288,1048576,2097152,262144,524288,1048576
setprop net.tcp.buffersize.lte 4094,87380,1220608,4096,16384,1220608
setprop net.tcp.buffersize.umts 4094,87380,110208,4096,16384,110208
setprop net.tcp.buffersize.hspa 4094,87380,1220608,4096,16384,1220608
setprop net.tcp.buffersize.hsupa 4094,87380,1220608,4096,16384,1220608
setprop net.tcp.buffersize.hsdpa 4094,87380,1220608,4096,16384,1220608
setprop net.tcp.buffersize.edge 4093,26280,35040,4096,16384,35040
setprop net.tcp.buffersize.gprs 4092,8760,11680,4096,8760,11680
setprop net.tcp.buffersize.evdo_b 4094,87380,262144,4096,16384,262144

# Assign TCP buffer thresholds to be ceiling value of technology maximums
# Increased technology maximums should be reflected here.
write /proc/sys/net/core/rmem_max 1220608
write /proc/sys/net/core/wmem_max 1220608

# Set this property so surfaceflinger is not started by system_init
setprop system_init.startsurfaceflinger 0

class_start core
class_start main

on nonencrypted
class_start late_start

on charger
class_start charger

on property:vold.decrypt=trigger_reset_main
class_reset main

on property:vold.decrypt=trigger_load_persist_props
load_persist_props

on property:vold.decrypt=trigger_post_fs_data
trigger post-fs-data

on property:vold.decrypt=trigger_restart_min_framework
class_start main

on property:vold.decrypt=trigger_restart_framework
class_start main
class_start late_start

on property:vold.decrypt=trigger_shutdown_framework
class_reset late_start
class_reset main

# Used to disable USB when switching states
on property:sys.usb.config=none
stop adbd
write /sys/class/android_usb/android0/enable 0
write /sys/class/android_usb/android0/bDeviceClass 0
setprop sys.usb.state $sys.usb.config

# adb only USB configuration
# This should only be used during device bringup
# and as a fallback if the USB manager fails to set a standard configuration
on property:sys.usb.config=adb
write /sys/class/android_usb/android0/enable 0
write /sys/class/android_usb/android0/idVendor 1004
write /sys/class/android_usb/android0/idProduct 61FC
write /sys/class/android_usb/android0/f_diag/clients diag
write /sys/class/android_usb/android0/functions serial,diag,ecm,mass_storage,adb
write /sys/class/android_usb/android0/enable 1
start adbd
setprop sys.usb.state $sys.usb.config

# USB accessory configuration
on property:sys.usb.config=accessory
write /sys/class/android_usb/android0/enable 0
write /sys/class/android_usb/android0/idVendor 18d1
write /sys/class/android_usb/android0/idProduct 2d00
write /sys/class/android_usb/android0/bDeviceClass 0
write /sys/class/android-usb/android0/bDeviceSubClass 0
write /sys/class/android-usb/android0/bDeviceProtocol 0
write /sys/class/android_usb/android0/functions $sys.usb.config
write /sys/class/android_usb/android0/enable 1
setprop sys.usb.state $sys.usb.config

# USB accessory configuration, with adb
on property:sys.usb.config=accessory,adb
write /sys/class/android_usb/android0/enable 0
write /sys/class/android_usb/android0/idVendor 18d1
write /sys/class/android_usb/android0/idProduct 2d01
write /sys/class/android_usb/android0/bDeviceClass 0
write /sys/class/android-usb/android0/bDeviceSubClass 0
write /sys/class/android-usb/android0/bDeviceProtocol 0
write /sys/class/android_usb/android0/functions $sys.usb.config
write /sys/class/android_usb/android0/enable 1
start adbd
setprop sys.usb.state $sys.usb.config

# Used to set USB configuration at boot and to switch the configuration
# when changing the default configuration
on property:persist.sys.usb.config=*
setprop sys.usb.config $persist.sys.usb.config

## Daemon processes to be run by init.
##
service ueventd /sbin/ueventd
class core
critical

service console /system/bin/sh
class core
console
disabled
user shell
group log

on property:ro.debuggable=1
start console

# adbd is controlled via property triggers in init.<platform>.usb.rc
service adbd /sbin/adbd
class core
disabled

# adbd on at boot in emulator
on property:ro.kernel.qemu=1
start adbd

# This property trigger has added to imitiate the previous behavior of "adb root".
# The adb gadget driver used to reset the USB bus when the adbd daemon exited,
# and the host side adb relied on this behavior to force it to reconnect with the
# new adbd instance after init relaunches it. So now we force the USB bus to reset
# here when adbd sets the service.adb.root property to 1. We also restart adbd here
# rather than waiting for init to notice its death and restarting it so the timing
# of USB resetting and adb restarting more closely matches the previous behavior.
on property:service.adb.root=1
write /sys/class/android_usb/android0/enable 0
restart adbd
write /sys/class/android_usb/android0/enable 1

service servicemanager /system/bin/servicemanager
class core
user system
group system
critical
onrestart restart zygote
onrestart restart media
onrestart restart surfaceflinger
onrestart restart drm

service vold /system/bin/vold
class core
socket vold stream 0660 root mount
ioprio be 2

service netd /system/bin/netd
class main
socket netd stream 0660 root system
socket dnsproxyd stream 0660 root inet

service debuggerd /system/bin/debuggerd
class main

service ril-daemon /system/bin/rild
class main
socket rild stream 660 root radio
socket rild-debug stream 660 radio system
user root
group radio cache inet misc audio sdcard_rw qcom_oncrpc diag

service surfaceflinger /system/bin/surfaceflinger
class main
user system
group graphics
onrestart restart zygote

service zygote /system/bin/app_process -Xzygote /system/bin --zygote --start-system-server
class main
socket zygote stream 660 root system
onrestart write /sys/android_power/request_state wake
onrestart write /sys/power/state on
onrestart restart media
onrestart restart netd

service drm /system/bin/drmserver
class main
user drm
group system inet drmrpc qcom_oncrpc

service media /system/bin/mediaserver
class main
user media
group audio camera inet net_bt net_bt_admin net_bw_acct drmrpc
ioprio rt 4

service bootanim /system/bin/bootanimation
class main
user graphics
group graphics
disabled
oneshot

service installd /system/bin/installd
class main
socket installd stream 600 system system

service flash_recovery /system/etc/install-recovery.sh
class main
oneshot

service racoon /system/bin/racoon
class main
socket racoon stream 600 system system
# IKE uses UDP port 500. Racoon will setuid to vpn after binding the port.
group vpn net_admin inet
disabled
oneshot

service mtpd /system/bin/mtpd
class main
socket mtpd stream 600 system system
user vpn
group vpn net_admin inet net_raw
disabled
oneshot

service keystore /system/bin/keystore /data/misc/keystore
class main
user keystore
group keystore
socket keystore stream 666

service dumpstate /system/bin/dumpstate -s
class main
socket dumpstate stream 0660 shell log
disabled
oneshot

Edit default.prop so it looks like:

#
# ADDITIONAL_DEFAULT_PROPERTIES
#
ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
persist.service.adb.enable=1

repack boot.img, put it onto your phone and your bootloader should be unlocked (if I am right :P)

If you tried it before I did, let me know if it boots ;)[/quote']

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.





×
×
  • Create New...